![]() |
| Enlarging the patterns full size is easy. First, count the number of squares given and rule on paper an equal number of 1-in. squares unless otherwise stated on the graph itself. Pattern for Dutch twins and a sailor with paddle arms made with a band saw. |
Here is how to make these adorable swinging-arm dolls. With old wooden packing boxes laid out in 1/2″ squares as material, mark the patterns according to the squared charts shown above. Before cutting out the figures, bore a hole through the shoulders and up one leg, as shown by dotted lines in diagrams at the right.
The sailor’s hat is made of thin wood cut in circular shape and nailed to the head. Bore a hole through the under side of each arm about %” deep and a 1″ hole lengthwise to take the wire which passes through the shoulders.Straight grained shingles or thin wood will do for paddles. Fasten them by driving a small brad or wire pin through the joint. Set the paddles at an angle (about 45 degrees) allowing easy turning by the wind.
When assembly is made, be sure to leave a small space between the arms and the body to permit swelling of the wood.

No comments:
Post a Comment
Constructive comments are appreciated. All comments are moderated and do not immediately appear after publishing. I don't publish spam folks. Thanks and have a nice day!
Note: Only a member of this blog may post a comment.