The answer is yes folks; that's the law sometimes. If you are reading my blog in a different country than where it originates here in the U.S., Blogger may need to alter what you are viewing. That's o.k. by me; better something than nothing I always say. So, my Belzsnickle Blog (Belsnickle) for the Canadian audience is listed as http://belsnickle.blogspot.ca and it is a shorter version than the original. Sorry for the confusion.
Index Pages
- Home
- My Blog
- Christmas Clip Art
- Painting Ideas for Wooden Ornaments
- Over 150 Christmas Ornament Crafts
- Puzzles and Games
- Just Putzen Around...
- Santa's Workshop
- Feather Tree Ornament Crafts
- Crafty Kid's Christmas Corner
- Country Folks
- Christmas Stories & Memories
- Christmas Carols
- Christmas Around The Globe
- Clay Ornament Index
Sunday, November 2, 2014
Saturday, November 1, 2014
Photocopy Leaf Prints for Your Blessing Tree
Who doesn't like to go for a walk in the fall leaves? For this project you will need to do so, however, I've included just a few samples of leaves you may print out that were found not far from my own home just below.
Take your little ones for a stroll through the park or neighborhood to collect some lovely fall leaves. Spread these face down on your printer's screen and close the lid, scan, and print in full color. Cut them out and back these with a bit of glue and a few nice fall themed papers. Insert a wire between the layers while you are pasting. I used a cotton covered wire and then painted my stems with brown and gold acrylic paints to mimic the real stems of leaves. These little delicate beauties may be hung from the very tips of a fragile Blessing tree; their colors will not fade for a few years nor will they shrink, crack or fall from your own indoor tree.
Left, xerox prints of my Fall leaf collection. Middle, cotton batting covered wire. Right, My leaf stems are ready for painting as soon as the paper ornaments have dried. |
Because my blessing tree is so very delicate, so must my ornaments be. Leaves are by their very nature light weight and so are the my leaf ornament versions for this year's tree. |
I collected these beautiful Fall leaves in my neighborhood for my Blessing Tree. |
You can capture their color and shapes with a scanning bed, no problem! |
There are many yellow leaves in our little community as well. |
You should see the magnificent Maple tree this one came from! |
More Fall Leaf Crafts for Your Home:
Friday, October 31, 2014
Thanksgiving Ornaments Made From Indian Corn
Indian corn comes in many colors. |
I chose to hang a few miniature Indian corn from my Blessing tree this year for the Thanksgiving holiday. As I was shopping for supper one night, I found their warm golds, bright oranges and varied brown tones to be irresistible. So instead of buying tomatoes and lettuce, I splurged and purchased these little cuties.
I trimmed the bulk of the husks off of their tops; these would be a bit too over-powering for my delicate little tree. Then I simply twisted some twine around their stems, added a bit of tacky glue to a few remaining husks and then pasted these around the stems to cover the knots. Wrap a few tight rubber bands around the husks so that these stay in place while they are drying. I also trimmed off the tips so that the corn looked more attractive.
Here are just a few of my Indian corn ornaments hanging on the Blessing Tree. |
More Decorating With Indian Corn for Thanksgiving:
My Blessing Tree for Thanksgiving
This year I decided to craft a "Blessing tree" or as some folks might call it a "Thanksgiving tree." I took the opportunity of using branches my husband trimmed from our overgrown fire bushes this month. These branches needed to be reinforced with wire and masking tape so that they could hold the weight of ornaments.
This is actually a very easy process if you have a proper pair of wire cutters. Simply bend your wire to match the curves of the branches and then twist the masking tape around both the wire and branch firmly. Then use a decorative paper to wrap the branches with while applying white glue along the length of every branch.
I brushed on a second coat of glue and let the branches to dry completely before displaying them along with a store bought branch that I had purchased for it's silk autumn leaves. If I had purchased more than one of these prefabricated branches, my project would have cost more than I had budgeted for. Besides, I think that my Thanksgiving ornaments will look nicer among the bare branches.
I brushed on a second coat of glue and let the branches to dry completely before displaying them along with a store bought branch that I had purchased for it's silk autumn leaves. If I had purchased more than one of these prefabricated branches, my project would have cost more than I had budgeted for. Besides, I think that my Thanksgiving ornaments will look nicer among the bare branches.
I decided to set my Fall display with Indian corn, a few Shaker boxes and some very large pine cones. |
Here is my final result. I will post more pictures here as soon as I have decorated this little Blessing tree. |
Related Links:
Thursday, October 23, 2014
Craft Cinnamon And Spice Dough Ornaments
I found this cinnamon dough recipe on the internet and used it to mold leaves and acorns for my Thanksgiving Blessing Tree. Their spicy smells remind me of apple cider, pumpkin pie and cinnamon infused maple flavored cookies and candies.
I tied the acorns and fall leaves made from cinnamon dough together with a brown and white cotton ribbon. I will hang these aromatic molded pieces from a Blessing tree this fall. |
- 1 cup cinnamon
- 1 cup applesauce (drained through a fine mesh sieve)
- 2 Tablespoons of white school glue
- wire and ribbon for hanging
- Tools you will need include: wax paper, glass bowl, rolling pin, counter or chopping block and molds or cookie cutters.
- Mix together 1 cup of cinnamon, 1 cup of drained applesauce and two tablespoons of white school glue. The dough should be a firm consistency. If it is too soft add cinnamon; if it is too dry and doesn't stick together add a bit more glue.
- You may either roll out the dough between sheet of wax paper before cutting it with a cookie cutter or you can press dough directly into a plastic mold and then remove it immediately to dry on a cookie baking sheet.
- I put my molded leaf and acorn shapes into a 200 degree oven to dry out. This took approximately one hour and thirty minutes. The length of time needed to dry out the molded cinnamon dough ornaments depends upon the humidity of the room and the amount of heat used inside the oven. The thickness of your ornaments will also predetermine the amount of time needed to dry out the ornaments.
- I poked a small hole into each of my molded pieces before drying them out so that I could string them together afterwards.
- Shape and insert thin wires into the holes provided for hanging.
- Tie on the ribbon.
- Chai Tea and Salt Dough and Whole Spice Ornaments
- Making Dried Fruit Christmas Ornaments
- Orange Rind Blossoms and Pine Cone Strung on a Garland
Christmas Crafting with Wheat: Pasting and Weaving
pasted wheat bell |
Straw patchwork, shown left and below, is a Chinese folk art that dates back to the Han Dynasty (250—230 CE) and developed during Sui Dynasty of 581—618 CE. During the Song Dynasty (960—1127 CE), straw patchwork was enjoyed by royalty. Wheat straw is smoked, steams, whitening, dyed, cut, and altered in a myriad of procedures to fashion delicate representational works. Today wheat straw patchwork is a decorative art and popular item for tourists to China. Above I have included a variety of photographs depicting straw patchwork used to create Christmas ornaments for the Western Christmas markets by Asian countries like China, Japan, and Taiwan.
This straw patchwork ornament took it's design from a Trogen horse. |
Straw plaiting is a method of manufacturing textiles by braiding straw. It is plaited to produce products including straw hats and ornaments, and the process is undertaken in a number of locations worldwide. Straw can be plaited for a number of purposes, including: the crafting of a paper-making material, for ornamenting small
surfaces as a "straw-mosaic", for plaiting into door and table mats,
mattresses and for weaving and plaiting into light baskets and to create
artificial flowers. Straw is also plaited to produce a variety of Christmas ornaments like those shown below.
"A Year of Swedish Slƶjd (Handcraft)" at the American Swedish Institute is a multi-dimensional project funded in part by the Minnesota State Arts Board through a Folk and Traditional Arts grant. In a series of youth and adult workshops, participants worked together with guest artists from throughout Minnesota, creating beautiful and functional objects out of ceramic tile, wood, birch bark, glass, wire, wheat, and felted wool. The instructor of the Wheat Weaving workshops was Carol Tamte.
This activity is made possible in part by a grant provided by the
Minnesota State Arts Board, through an appropriation by the Minnesota
State Legislature from the Minnesota arts and cultural heritage fund
with money from the vote of the people of Minnesota on November 4,
2008."
- Article from the Nordic Needle
- Examples of Flat Polish Straw Stars
- Scandinavian Christmas Magic at the EkenƤs castle
- Putting out the hare, putting on the harvest knots
- Neil Thwaites - The Corn Dolly Man
- The Guild of Straw Craftsmen - Links
- Simple Raffia Braids
- Wheat Weaving: Getting Started Basics
- Wheat Weaving: Easy Harvest Braid
- Wheat Weaving: Heart-shaped wedding favor
- Wheat Weaving: Love Knot
- Making a traditional Corn Dolly at the Somerset Rural Life Museum
- Wheat Harvest: Make House Blessing
- Make a Tied Straw Christmas Tree
- Craft Traditional Tied Straw Stars
Inspired by Old-World Beaded Ornaments
I beaded the ornaments above on long, straight lengths of wire first and then shaped them around cookie cutters. Their simple shapes were inspired by antique beaded ornaments that I had seen on ebay.
1939 beaded ornaments handmade from Poland. |
Old World Beaded Christmas Ornaments:
"To weave such star you'll need seed beads (for example, size 10-11),
beads with diameter of about 2-4 mm, bugles of two sizes (long and
short), fishing line with diameter of about 0,15 mm or fireline and
beading needle size 11-15. Take of about 1 meter of thread (fireline),
put both its ends through the needle eye and follow the cartoon. You can see my other cartoons here: http://katenkin-biser/lessons/indexen... You can buy my patterns here: http://www.bead-patterns.com/shop/sho..."
Subscribe to:
Posts (Atom)