Monday, November 17, 2014

Children's Alphabet Block Ornaments

A toy soldier, sailboat and wooden zebra will make an adorable menagerie on my Christmas tree this year!
A flocked cat with bright green eyes plays with a
ball on top of the letter K alphabet block.
       There are so many tiny toys that small chubby hands have stuffed into drawers here and there throughout my home. These little creatures are too charming to throw away and yet they are of little to no use to anyone since our children have grown. So, I decided to glue them to a set of children's alphabet blocks I purchased for pennies from a resale shop.
      I used a tacky white glue to adhere the toys to the wooden surfaces. I will wire them on the bottom so that I can attach them to branches differently from hanging ornaments. I like to have several attachment options when it comes to decorating my Christmas trees.

More Alphabet Block Christmas Tree Ornaments:
My husband's little dog chewed on these tiny, wooden German toys when he was young. I hadn't the heart to throw them out.
Here I have attached some odd assortment of miniature china animals to a few of the alphabet blocks.
A small wood turned Santa Claus figure along with a bottle brush tree and wool tree skirt finish off the top of my letter G alphabet block.

Thursday, November 13, 2014

Paper Pulp, Silver Foil Belznickle Ornaments

These papier-mâché ornaments look much older than they
really are.
Supply List:
  • silver foil spray paint
  • acrylic paints: red, green, black, blue, white, flesh tone and brown
  • masking tape
  • paper pulp (Celluclay)
  • newspaper, newsprint
  • permanent ink marker
  • Acrylic varnish
Step-by-Step Instructions:
  1. Crush newsprint into the rough shapes of standing figures. You needn't add any detail as of yet. The details are made with the Celluclay after the newsprint has been covered completely with masking tape.
  2. Mask with tape the entire figure.
  3. Now take a permanent ink pin and roughly mark on your figures where the face, arms, tree and hoods should be. You can also rough in the features of your Belznickle.
  4. Add a wire hook to the backside of each figure with glue and masking tape. Make sure this sticks out a bit after you have added pulp around it.
  5. Mix together the Celluclay with a bit of warm water. If the mixture is too loose add more pulp; if the mixture is too dry add more water.
  6. Add a couple of Tablespoons of glue to the mixture to make it extra tacky.
  7. Shape the features of your Belznickle with the Celluclay. It will stick to the surface of the masking tape quite easily. You will need to let the front side of your Belznickle dry in a warm place for a few days before sculpting on the backside of the figures. As you may have guessed these ornaments are best made during the warmer times of the year.
  8. After the Belznickles have dried, you may spray paint them with silver foil paint. Do this in a well ventilated area, like a garage. Also put the figures inside of a large box while you spray. This will prevent the paint from floating onto the surface of something that you do not intend to cover with silver foil paint.
  9. When these little guys have dried, paint them with acrylic paints. Let them dry again.
  10. Varnish the figures with acrylic varnish and string them with a wire or ribbon for hanging.
This is what Celluclay looks like before and after you mix it with water and a bit of glue.

Wrap a Pipe-Cleaner Wreath Ornament

My finished pipe-cleaner wreath ornament.
Supply List:
  • tiny red pom poms
  • Green chenille stems (pipe cleaners)
  • a hexagonal pattern
  • cardboard
  • scratch paper
  • pencil
  • scissors
  • white glue
  • green ribbon
Step-by-Step Directions:
  1. Cut a hexagon from a then piece of sturdy cardboard. Use a pencil to draw a smaller hexagon on the inside of the shape in the exact center of the cardboard. 
  2. Cut out the smaller interior hexagon carefully.
  3. Now carefully wrap green chenille stems around the cardboard shaped wreath. You may choose to use a little white glue to help the chenille adhere to the cardboard surface as you work.
  4. Let the wreath dry. 
  5. Glue on tiny red pom poms to both sides.
  6. Tie on a lovely green silk ribbon to hang your ornament on the tree.
Hexagonal shaped wreath ornament. Left, paper template. Center, cardboard cut-out. Right, shape wrapped in chenille stems.
More Chenille Stem Wreath Ornaments:

Christmas Penny Peppermint Ornaments

      I used left over scrap wool for this Christmas ornament project. Little girls used to practice their sewing skills making decorative penny rugs during the mid 1800s for their homes. These little "rugs" as they called them were used to protect the surfaces of trunks, tables and dressers from scratches. 
      Traditional penny rugs use only round wool felt clippings for their designs but modern crafters often incorporate these simple shapes with more complicated motifs in their rug designs.
      I made these penny peppermints using two stitches: the straight stitch and a blanket stitch. However, you may use the embroidery stitches that you prefer to make similar versions.

Supply List:
  • red and white threads
  • red and white wool scraps
  • circle template or coins to trace around
  • plastic sandwich bags
  • white glue
  • wire hooks for hanging
  • scissors
  • needle
Step-by-Step Instructions:
  1. Draw circular shapes to layer on top of each other by tracing around objects like coins or use a circle template if you like.
  2. Then alternate red and white penny shaped wool scraps to suggest peppermint candies.
  3. Knot the red thread and work from the back to the front all around the wool felt shapes.Sew using a straight stitch the first four layers of penny shapes together.
  4. Then blanket stitch the fourth layer on top of the fifth using white thread.
  5. Cut two more white felt circles to sandwich between two identical finished penny peppermints to give the wool candies thickness. Blanket stitch around the outside of these layers with red thread.
  6. Cut the sandwich bags into rectangles. Wrap the wool peppermints by twisting either end together just like real peppermint candies are packaged. I wound white thread and added a bit of white glue to the threads in order to hold the plastic in place.
  7. Twist on a wire hook at one end to hang your wool peppermint candies on the tree.
Left, Steps for layering the peppermint penny ornaments. Right the finished result before wrapping these in plastic candy wrappers.
Penny rug sample
      In the 1800s, starting around the time of the Civil War, thrifty homemakers would use scraps of wool or felted wool from old clothing, blankets and hats to create designs for mats or rugs. Using coins as templates, they created circles and each piece was then stitched in blanket stitch fashion. (Thus, the name "penny" rug). Sometimes, the mats or rugs were backed with old burlap bags or feed sacks. Sometimes a penny was stitched inside the mat to make it lie flat.
      Penny rugs are not actual rugs for the floor, but decorative coverings for beds, tables and dressers and mantles. Sometimes they are used as wall hangings or pillows. Most designs include circles and some include images from everyday life such as cats, flowers, birds and shapes such as stars and hearts.
       Penny rugs are made by selecting good quality 100% wool. It must not be too thick. It may be hand-dyed or overdyed to give the piece dimension. The wool is felted then circles are cut from the wool in varying sizes and then stitched together concentrically using complementary colors. The circles are stitched to a wool backing in a pleasing design. When finished the entire piece should have a backing to cover the stitches and to protect it. The backing may be wool, linen or burlap.

More Penny Rug Inspired Christmas Ornaments:

Craft a Cotton Batting, Birch Yule Log Ornament

The front and back views of my Birch Yule Log Christmas ornament.
Birch trees click to read more about this species.
Supply List:
  • two toilet paper rolls
  • scissors
  • white school glue
  • grey dryer lint
  • white cotton balls
  • black thread
  • holly and berry trims
  • tiny mushroom bird
  • masking tape
  • cotton covered wire
Step-by-Step Directions:
  1.  Cut and shape the two toilet paper rolls or any paper tubes to resemble a cut log. I choose to make this birch log shape a little narrower than the original circumference of an average toilet paper roll. I cut my two rolls length wise and curled them tighter before masking them with tape. 
  2. I cut down the size of one of the rolls and added a bit of glue to it's edge, then used masking tape to firmly attach the appendage to one end of my log.
  3. Mask the entire form with tape before gluing on the dryer lint and cotton batting.
  4. Unravel your cotton balls several at a time so that you can work quickly.
  5. Apply white glue to sections of the log's surface as you layer the lint and cotton onto the cardboard tubes. 
  6. Give your Yule log time to dry between applications. I also layered dryer lint on the end interior surfaces of my log. I left parts of the log open however, in order to insert a letter or small money gift into the ornament later.
  7. Once the log looks the way you wish it to, wrap black thread around it randomly to enhance the total realistic look of Birch bark. 
  8. Use the tip of your scissors to poke a hole in either end of your finished log and insert a cotton covered wire to shape a handle for the ornament. 
  9. I also wrapped a few vintage wired holly leaves/berries around this handle.
  10. Glue on a little prefabricated mushroom bird to the top of your Yule log ornament too.
  11. Now add a final thin coat of white glue to the finished piece and you are finished.
A few odd angles of the Yule log.
More About Yule Logs:

Monday, November 10, 2014

Kids Can Cut and Paste A Heart-Shaped Christmas Tree

Left, finished Christmas tree. Center, backside of construction paper tree. See the different colors of tissue paper pasted over each hole. Right, the finished heart-shaped, Christmas tree craft.
 
The tree before tissues added.
      Here is a simple little Christmas craft that any young child may enjoy making on a snowy Winter's day. You will need the following supplies: colored tissue papers, brown and green construction paper, scissors, white glue and round objects to use as stencils. 
      Cut out one very large heart from dark green construction paper. Turn this upside down and glue a large brown square to the backside of the heart leaving a few inches of it showing beneath the heart to represent the tree's trunk. Then cut a slightly smaller heart using a lighter shade of green construction paper and glue this on top of the larger heart shape. Continue cutting and gluing additional hearts in the same fashion. Look above at the photos to see the placement of these heart shapes. 
      Next use round objects or stencils to trace Christmas baubles on top of each section of your construction paper tree. Poke through each circle with the point of a pair of scissors and carefully cut away the circular shapes. Turn your Christmas tree over to it's backside and then paste small squares of tissue to cover each hole entirely. Let the surface dry.
      Now you are ready to hang your decorated, construction paper tree on to any window. The light shining through each circular shape will look like stained glass.

More Tissue Paper Christmas Tree Crafts:

       There's something about Christmas that enthralls me. It's a certain atmosphere that settles over the world like a blanket. I can't explain it neither can you, but you feel it as acutely as I do. When someone mentions Christmas I see many different pictures. First I see the word, "Christmas'', written in holly on a pale yellow background. Next I see patches of green, red, and brown. The colors than become more distinguishable and I can see that they are in our front hall which is done in brown paneling, the red is our stockings and the red berries of the holly wreaths, the green patches are the Christmas tree and the green in the holly leaves. My next vision is of a sled packed with people jingling merrily along. My last vision is a myraid of swirling skirts and pattering feet keeping time to the music.'' Alexandra Ulri, Age 12

Friday, November 7, 2014

Enhance a Christmas Stocking With Costume Jewelry

 I used a grey felt, silver and crystal seed beads and a simple
 scene depicting a snowman to create this small stocking that
 now hangs on my youngest child's Christmas tree every year.
      When my mother-in-law passed away many years ago, I was given a few pieces of her costume jewelry. I did not frequently wear rhinestones nor did my little ones at that time, for they were quite young.
      I did, however, have a mind to use these vintage pins in some way so that my children could have some sentimental memory associated with them. So I incorporated this glittery costume jewelry into a couple of beaded Christmas stockings. Then I gifted these to my girls on the Christmas following their grandmother's death.
      Now every year I see these charming little socks hanging on their trees and think of her. She would have liked for her granddaughter's to remember her most at Christmas, for she was quite the Christmas fanatic herself. It was one of the happiest common interests that we shared together before her passing.
      The pins can also be removed for wearing should my daughters care to use them for that purpose some day.
      I will also post photos of my older girl's version as soon as she unpacks her ornaments for the season.

More Christmas Ornament and Stocking Glitz:
My appliqued snowman is made from white wool and he
sports a wooly scrap scarf as well.
Photographed here is one of the little rhinestone twig pins
that once belonged to my mother-in-law.
I finished the top edge of these stockings with wire and glass
seed beads. The sides of the stockings are finished with
embroidery floss using the blanket stitch.