Using enlargements of favorite photos, you can make these tie racks for yourself, and they will be appreciated as gifts by your friends. A photo of the head and shoulders is glued to 1/4-in. plywood and then cut out with a jig saw. When finished, the photo should be about 7 in. high. If desired, silhouettes can be substituted for photos. In this case, the outline of a photo is traced directly on the wood, which is then sawed to shape and painted black. The rack for the ties is a block of 3/4-inch hardwood cut as shown and screwed to the plywood back near the lower edge. L-hooks to hold the ties are then driven into the edge of the hardwood piece.
No comments:
Post a Comment
Constructive comments are appreciated. All comments are moderated and do not immediately appear after publishing. I don't publish spam folks. Thanks and have a nice day!